HELP YOU IN FORTINET NSE8_812 EXAM PREPARATION [2025]

Help You in Fortinet NSE8_812 Exam Preparation [2025]

Help You in Fortinet NSE8_812 Exam Preparation [2025]

Blog Article

Tags: Complete NSE8_812 Exam Dumps, NSE8_812 Reliable Test Camp, NSE8_812 Exam Testking, NSE8_812 Certification Practice, NSE8_812 Exam Dumps Demo

The only aim of our company is to help each customer pass their exam as well as getting the important certification in a short time. If you want to pass your exam and get the NSE8_812 certification which is crucial for you successfully, I highly recommend that you should choose the NSE8_812 certification braindumps from our company so that you can get a good understanding of the exam that you are going to prepare for. We believe that if you decide to buy the NSE8_812 Exam Materials from our company, you will pass your exam and get the certification in a more relaxed way than other people.

The NSE8_812 study guide to good meet user demand, will be a little bit of knowledge to separate memory, every day we have lots of fragments of time. The NSE8_812 practice dumps can allow users to use the time of debris anytime and anywhere to study and make more reasonable arrangements for their study and life. Choosing our NSE8_812 simulating materials is a good choice for you, and follow our step, just believe in yourself, you can do it perfectly!

>> Complete NSE8_812 Exam Dumps <<

Valid Complete NSE8_812 Exam Dumps, NSE8_812 Reliable Test Camp

By resorting to our NSE8_812 practice materials, we can absolutely reap more than you have imagined before. We have clear data collected from customers who chose our NSE8_812 actual tests, the passing rate is 98-100 percent. So your chance of getting success will be increased greatly by our NSE8_812 braindump materials. Moreover, there are a series of benefits for you. So the importance of NSE8_812 actual test is needless to say. If you place your order right now, we will send you the free renewals lasting for one year.

The NSE8_812 Exam is an eight-hour, open-book exam that consists of 60 multiple-choice questions. NSE8_812 exam covers a wide range of topics, including network design, security protocols, VPN technologies, firewall policies, and advanced threat protection. To pass the exam, candidates must score at least 70% on each section of the exam. In addition, candidates must have at least five years of experience in the network security field and hold the Fortinet NSE 7 certification.

Fortinet NSE 8 - Written Exam (NSE8_812) Sample Questions (Q87-Q92):

NEW QUESTION # 87
Refer to the exhibits.

The exhibits show a diagram of a requested topology and the base IPsec configuration.
A customer asks you to configure ADVPN via two internet underlays. The requirement is that you use one interface with a single IP address on DC FortiGate.
In this scenario, which feature should be implemented to achieve this requirement?

  • A. Use local-id
  • B. Change advpn2 to IKEv1
  • C. Use peer-id
  • D. Use network-overlay id

Answer: D

Explanation:
A is correct because using network-overlay id allows you to configure multiple ADVPN tunnels on a single interface with a single IP address on the DC FortiGate. This is explained in the FortiGate Administration Guide under ADVPN > Configuring ADVPN > Configuring ADVPN on the hub. References: https://docs.
fortinet.com/document/fortigate/7.4.0/administration-guide/978793/advpnhttps://docs.fortinet.com/document
/fortigate/7.4.0/administration-guide/978793/advpn/978794/configuring-advpn
https://community.fortinet.com/t5/FortiGate/Technical-Tip-Use-case-of-Network-Ids-with-ADVPN-shortcut
/ta-p/241025


NEW QUESTION # 88
Review the VPN configuration shown in the exhibit.

What is the Forward Error Correction behavior if the SD-WAN network traffic download is 500 Mbps and has 8% of packet loss in the environment?

  • A. 1 redundant packet for every 10 base packets
  • B. 2 redundant packet for every 8 base packets
  • C. 3 redundant packet for every 9 base packets
  • D. 3 redundant packet for every 5 base packets

Answer: A

Explanation:
The FEC configuration in the exhibit specifies that if the packet loss is greater than 10%, then the FEC mapping will be 8 base packets and 2 redundant packets. The download bandwidth of 500 Mbps is not greater than 950 Mbps, so the FEC mapping is not overridden by the bandwidth setting. Therefore, the FEC behavior will be 2 redundant packets for every 8 base packets.
Here is the explanation of the FEC mappings in the exhibit:
* Packet loss greater than 10%: 8 base packets and 2 redundant packets.
* Upload bandwidth greater than 950 Mbps: 9 base packets and 3 redundant packets.
The mappings are matched from top to bottom, so the first mapping that matches the conditions will be used.
In this case, the first mapping matches because the packet loss is greater than 10%. Therefore, the FEC behavior will be 2 redundant packets for every 8 base packets.


NEW QUESTION # 89
Refer to the exhibit.

To facilitate a large-scale deployment of SD-WAN/ADVPN with FortiGate devices, you are tasked with configuring the FortiGate devices to support injecting of IKE routes on the ADVPN shortcut tunnels.
Which three commands must be added or changed to the FortiGate spoke config vpn ipsec phasei-interface options referenced in the exhibit for the VPN interface to enable this capability? (Choose three.)

  • A. set add-route enable
  • B. set mode-cfg enable
  • C. set mode-cfg-allow-client-selector enable
  • D. set net-device disable
  • E. set ike-version 1

Answer: A,B,C

Explanation:
* B must be set to enable mode-cfg, which is required for injecting IKE routes on the ADVPN shortcut tunnels.
* D must be set to enable add-route, which is the command that actually injects the IKE routes.
* E must be set to enable mode-cfg-allow-client-selector, which allows custom phase 2 selectors to be configured.
The other options are incorrect. Option A is incorrect because net-device disable is not required for injecting IKE routes on the ADVPN shortcut tunnels. Option C is incorrect because IKE version 1 is not supported for ADVPN.
References:
* Phase 2 selectors and ADVPN shortcut tunnels | FortiGate / FortiOS 7.2.0
* Configuring SD-WAN/ADVPN with FortiGate | FortiGate / FortiOS 7.2.0


NEW QUESTION # 90
Refer to the exhibits.


A customer is looking for a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E.
Referring to the exhibits, which two conditions allow authentication to the client devices before assigning an IP address? (Choose two.)

  • A. Client devices must have 802 1X authentication enabled
  • B. FortiGate devices with NP6 and hardware switch interfaces cannot support 802.1X authentication.
  • C. Devices connected directly to ports 3 and 4 can perform 802 1X authentication.
  • D. Ports 3 and 4 can be part of different switch interfaces.

Answer: A,C

Explanation:
The customer wants to deploy a solution to authenticate the clients connected to a hardware switch interface of a FortiGate 400E device. A hardware switch interface is an interface that combines multiple physical interfaces into one logical interface, allowing them to act as a single switch with one IP address and one set of security policies. The customer wants to use 802.1X authentication for this solution, which is a standard protocol for port-based network access control (PNAC) that authenticates clients based on their credentials before granting them access to network resources. One condition that allows authentication to the client devices before assigning an IP address is that devices connected directly to ports 3 and 4 can perform 802.1X authentication. This is because ports 3 and 4 are part of the hardware switch interface named "lan", which has an IP address of 10.10.10.254/24 and an inbound SSL inspection profile named "ssl-inspection". The inbound SSL inspection profile enables the FortiGate device to intercept and inspect SSL/TLS traffic from clients before forwarding it to servers, which allows it to apply security policies and features such as antivirus, web filtering, application control, etc. However, before performing SSL inspection, the FortiGate device needs to authenticate the clients using 802.1X authentication, which requires the clients to send their credentials (such as username and password) to the FortiGate device over a secure EAP (Extensible Authentication Protocol) channel. The FortiGate device then verifies the credentials with an authentication server (such as RADIUS or LDAP) and grants or denies access to the clients based on the authentication result. Therefore, devices connected directly to ports 3 and 4 can perform 802.1X authentication before assigning an IP address. Another condition that allows authentication to the client devices before assigning an IP address is that client devices must have 802.1X authentication enabled. This is because 802.1X authentication is a mutual process that requires both the client devices and the FortiGate device to support and enable it. The client devices must have 802.1X authentication enabled in their network settings, which allows them to initiate the authentication process when they connect to the hardware switch interface of the FortiGate device. The client devices must also have an 802.1X supplicant software installed, which is a program that runs on the client devices and handles the communication with the FortiGate device using EAP messages. The client devices must also have a trusted certificate installed, which is used to verify the identity of the FortiGate device and establish a secure EAP channel. Therefore, client devices must have 802.1X authentication enabled before assigning an IP address. References: https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/hardware-switch-interfaces https://docs.fortinet.com/document/fortigate/7.0.0/administration-guide/19662/802-1x-authentication


NEW QUESTION # 91
Refer to the exhibit.

You are managing a FortiSwitch 3032E that is managed by FortiLink on a FortiGate 3960E. The 3032E is heavily utilized and there is only one port free.
The requirement is to add an additional three FortiSwitch 448E devices with 10Gbps SFP+ connectivity directly to the 3032E. The plan is to use split port (phy-mode) with QSFP28 mode to connect the new 448E switches.
In this scenario, which statement about the switch deployment is correct?

  • A. The port most of Switch 1 must be changed to QSFP.
  • B. Additional ports on Switch 1 can be split for a maximum of 128 interfaces.
  • C. After enabling split ports and rebooting Switch 1, the new ports can be configured from the FortiGate.
  • D. Switches 2-4 will connect successfully with Switch 1 split port in QSFP28 mode.

Answer: A


NEW QUESTION # 92
......

As long as you study with our NSE8_812 exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure. We really need this efficiency. Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of NSE8_812 Training Questions, you will agree with what I said. What our NSE8_812 study materials contain are all the real questions and answers that will come out in the real exam.

NSE8_812 Reliable Test Camp: https://www.testinsides.top/NSE8_812-dumps-review.html

Report this page